Bicycle cushion can be made by using bicycle cushion low-pressure foaming machine, bicycle cushion high-pressure foaming machine, bicycle cushion ring line, bicycle cushion disc line. The pictures of the machine are as follows:

Two-component low-pressure foaming machine for bicycle seat is a new product independently developed by lingxin company, which has the characteristics of high repeat injection accuracy, even mixing, stable performance, simple operation and high production efficiency, suitable for the production of bicycle seat and other products.

Equipment technical parameters:

Bicycle cushion 2 components high pressure foaming machine is the liquid polyols and isocyanates two components of the raw materials respectively stored in two material storage tank, by two rotary axial plunger metering pump (radial) sent to the mixed system, under the action of hydraulic mixing head open, two components was injected into the small mixing chamber with a high speed, high speed collision and mixing effect, make the material liquid evenly, mixing effect is good, no clean, stable performance, easy operation, achieve the goal of high production efficiency and environmental protection, is suitable for the production of bicycle cushion and other products.

Equipment technical parameters:

Bicycle cushion ring production line is a necessary equipment for mass production of polyurethane products. This machine, combined with polyurethane foaming machine, continuously fills the mould on the annular line travelling platform, so as to realize flow operation and achieve the purpose of efficient production.

Application: this model is suitable for producing bicycle cushion and other products.

Equipment features:

1) the equipment is simple and easy to use.

2) labor saving.

3) high yield.

4) the mold is heated by oven and heated evenly.

Equipment technical parameters:

Bicycle cushion disc line is used for foaming production of all kinds of polyurethane products. The equipment operates at a constant speed, and the running speed can be adjusted to the production beat. The disk is equipped with a power supply and air source conveying system. It forms a complete foaming production line with mold temperature machine. Suitable for production of bicycle cushion and other products.

Equipment features:

1) the equipment is simple and easy to use.

2) labor saving.

3) high yield.

4) the mold is heated by water in the mold temperature machine and heated evenly.

Technical parameters of equipment: